Floors that take a beating. Built for the spaces that earn money.
Warehouses, restaurants, retail, automotive, manufacturing. Polyaspartic-grade systems spec’d to your traffic load, chemical exposure, and slip requirements. COIs on file. Warranties in writing.
Free site walkthrough.
Tell us about the facility. We’ll coordinate the walk and a fixed quote in 24-48 hours.
The floor is part of the operation.
Commercial floors don’t fail like residential floors. They fail because of forklift wheels, hot grease, brake fluid, deicer salt off truck tires, chemical drips, daily mopping with industrial cleaners, and concentrated foot traffic in the same lanes for years.
What works in a garage doesn’t survive a warehouse. The chemistry has to be tougher, the prep has to be deeper, the broadcast has to add real slip resistance, and the topcoat needs to be measured in mils that exceed residential specs.
Spaces we coat across San Diego County:
- Warehouses and distribution centers (forklift traffic, rack zones)
- Restaurant kitchens, walk-in coolers, prep areas (NSF requirements)
- Retail showrooms and entryways (high foot traffic, aesthetics)
- Auto service bays, detail shops, dealership service drives
- Manufacturing floors, machine pads, assembly lanes
- Veterinary and animal care (chemical wash-down, slip resistance)
- Light industrial and storage facilities
Every install includes spec sheets, MSDS, a written warranty, and a Certificate of Insurance in your name before the crew steps onto your slab.
Three commercial spec tiers.
We spec the system to your operation – not a one-size-fits-all sticker.
Phased, scheduled, and contained.
Live spaces stay operational. We work around your hours.
Site walkthrough
We meet on-site. Measure, spec, identify access constraints, plan around your operations.
Scoped quote
Fixed price, in writing, with system spec sheet, schedule, COI, and warranty terms. 24-48 hours.
Phased prep
Diamond-grind in sections. Containment for live spaces. Off-hours work where required.
Install & sign-off
Polyaspartic system applied per spec. Walk-through with you. Documentation handed over.
The standard behind every San Diego floor
Diamond-ground prep
Every San Diego slab is mechanically diamond-ground, not acid-etched, so the coating actually bonds and stays down.
Most garages in a day
A standard garage is prepped, coated, and topcoated in one day. Back to parking without a week of downtime.
Bonded and insured
Fully bonded with liability coverage. Ask for the certificate before any crew starts.
The Lodestone Coat Standard
A written commitment on adhesion and finish. If a covered issue shows up, we come back and make it right.
What facilities managers ask first.
Related coatings.
Commercial floors that take San Diego County’s abuse.
San Diego’s mild coast is easy on people but still works on concrete. Steady UV and marine-layer moisture slowly degrade bare and painted slabs, and many County garages and patios carry years of embedded oil. The climate is forgiving enough that prep, not weather, is usually what decides whether a coating lasts here. From coastal homes to inland County neighborhoods, the slabs we coat are often older and well-used, so grinding out oil and opening the concrete is what makes the finish bond for the long run.
San Diego shops, warehouses, and showrooms run their floors hard — forklifts, foot traffic, chemicals — on top of mild coastal climate, steady UV, and marine-layer moisture. We spec commercial-grade polyaspartic and broadcast systems that hold up, with fast cures that keep San Diego businesses open.
We install commercial coatings across San Diego and San Diego County, prepped for mild coastal climate, steady UV, and marine-layer moisture.
Can you coat a San Diego warehouse or shop floor with minimal downtime?
Yes — our fast-curing commercial systems let most San Diego facilities reopen in about a day, and we schedule around your hours to keep the business running.
Will the floor handle chemicals and heavy traffic in San Diego?
Our commercial-grade coatings are built for San Diego industrial use — resistant to oils, chemicals, hot tires, and forklift traffic, and sealed against mild coastal climate, steady UV, and marine-layer moisture.
How much does a commercial or industrial floor coating cost in San Diego?
In San Diego, a commercial or industrial floor coating typically costs $4.5 to $11 per square foot installed. The figure covers surface preparation, the coating system itself, and labor. What moves a quote inside that range is slab condition, how much grinding and crack repair the floor needs before anything is applied, the finish you choose, and access to the space.
How we specify a floor in San Diego
San Diego’s mild coast is easy on people but still works on concrete. Steady UV and marine-layer moisture slowly degrade bare and painted slabs, and many County garages and patios carry years of embedded oil. The climate is forgiving enough that prep, not weather, is usually what decides whether a coating lasts here. From coastal homes to inland County neighborhoods, the slabs we coat are often older and well-used, so grinding out oil and opening the concrete is what makes the finish bond for the long run.
Every slab is tested before we quote a system. Moisture drives more coating failures than any other single factor, so we measure it rather than guess: a calcium chloride test to ASTM F1869 for moisture vapor emission, or in-slab relative humidity probes to ASTM F2170 where the slab is newer or below grade. If the readings come back high, the floor gets a moisture-mitigating primer before the build coats, not a thicker topcoat.
Preparation is mechanical, never acid etching. Diamond grinding opens the slab to an ICRI CSP-2 to CSP-3 surface profile, which is the texture a coating needs to key into concrete properly. Cracks and joints are chased out and filled before the first coat. Slab flatness and finish are assessed against ACI 302.1R guidance so we can tell you up front what the floor will and will not hide.
Systems are quoted by total mil build, not by coat count, because that is what determines how long a floor lasts. A flake system for a working garage is typically specified in the 20 to 30 mil range; a thin roll-on kit is often 8 to 12 mils, which is why it wears through at the tire tracks first. Polyaspartic topcoats cure fast and hold a wider application window than epoxy, they stay UV-stable rather than ambering in daylight, and their short pot life and recoat window are exactly why they are a crew-and-equipment job rather than a weekend project.
Quote your facility floor in 24-48 hours.
Free site walkthrough. Spec sheet, COI, and written warranty before the first crew arrives.